Lada klub Srbija

I welcome,
I am calling for help, I have a problem with the spark on candles. I changed candles, cables and the ignition coil and still nothing, I don't know what to do.
So he is but a spark is times on candles. I don't know what to do.
I have such mistakes on a computer:

Я встречаю,
прош? о помощь, у меня проблема с искр? на? митингах. Вымени?эм? митинги, кабели и цевк? зап?онов? и по-прежнему ничего, я не знаю что делает?.
Jest так? е только времена - искра на? митингах. Я не знаю что делает?.
Я имею такой б??ды на компьютере:

Р0201 Обрыв цепи управления форсункой 1-го цилиндра
Р0202 Обрыв цепи управления форсункой 2-го цилиндра
Р0203 Обрыв цепи управления форсункой 3-го цилиндра
Р0204 Обрыв цепи управления форсункой 4-го цилиндра

Р0134 Отсутствие сигнала основного датчика кислорода (ДКО)
Р0560 Ошибка напряжения бортовой сети автомобиля
Р1140 Несоответствие измеренной нагрузки с расчетной
Р1602 Отключение напряжения питания ЭБУ

Bobina i komutator?

Did you check ignition module (part no. 2112-3705010)?

I have new ignition module. What can a lack of the spark depend still on? Can some sensor? no mechanic can help me.

Lada 2110'2 1,5 99', MPI

when computer shows a lot of error codes, the problem can be computer itself. Do you know the number and type of computer in your Lada?

bgzoka wrote:when computer shows a lot of error codes, the problem can be computer itself. Do you know the number and type of computer in your Lada?

Bosch MP7, 2111-1411020-40, 2111, Евро-2

how to check the computer

josif visarionovic wrote:Bobina i komutator?

komutator?
what is Bobina?

You should go to your local LADA repairment facility and ask them to connect DST (Computer Management Console for Lada cars) and try to restart computer or if they have computer of same type then they should try to connect it and see if there is any changes.

What ever you do let us know if you accompish anything.

Wish you luck!

I have:

and I erased errors but it isn't helping.
whether there is a possibility put in the house the new software?

I will check groups of cables from the computer to the ignition module,
perhaps there something isn't linking if he sometimes acts.

That is the picture of your board computer. You have to reset your car computer (Bosch). You can try to disconect + wire on your car's battery for 1 min. and than reconnect it.

I know that it is in a photo it board computer, he is resetting and I am erasing errors in the car.

Р0201 Обрыв цепи управления форсункой 1-го цилиндра
Р0202 Обрыв цепи управления форсункой 2-го цилиндра
Р0203 Обрыв цепи управления форсункой 3-го цилиндра
Р0204 Обрыв цепи управления форсункой 4-го цилиндра
what do these errors mean?
what is injured?

what is answering around so that there is a spark?
candles, cables, ignition module and computer.

Sp4rkY wrote: Р0201 Обрыв цепи управления форсункой 1-го цилиндра
Р0202 Обрыв цепи управления форсункой 2-го цилиндра
Р0203 Обрыв цепи управления форсункой 3-го цилиндра
Р0204 Обрыв цепи управления форсункой 4-го цилиндра

From translate.ru:

R0201 Breakage of a circuit of management by an atomizer of 1-st cylinder
R0202 Breakage of a circuit of management by an atomizer of 2-nd cylinder
R0203 Breakage of a circuit of management by an atomizer of 3-rd cylinder
R0204 Breakage of a circuit of management by an atomizer of 4-th cylinder

Jel su candles ili spark plugs?

parkvets wrote:Jel su candles ili spark plugs?

Ха-ха-ха-ха-ха...!!!!
Да, да, да...

what it is nr 3 i 6 ?