Lada klub Srbija

Gentle mans here is my problem. I have a 2101 1200cc and is a good car. it doesnt take too much gas what is good cause now is expensive. I use it just to go to the university , but know im trying to power up the engine a little bit,
darkmen told me to do a couple of things like change the valves and replace (the valves) for a bigger ones to be specific Opel 1.8. Opel parts are quite rare here in Peru. We have tons of japanesse cars. Europeans not too much.
Could you help me with other options .
Another friend told me to use a new camshaft (from Lada Niva) and adjustable camgear. How possible is that .
I need details to repair the engine cause i need to repair it anyway but i like to obtain more power and unfourtunately i was unable to find information about what to do and how to do it .
Well that´s it i hope somebodu can help me

easyest option is to just swap engine for a bigger one, 1.5 or 1.6 or even 1.7 from niva. any rear wheel driven lada is the same as far as the engine mounts and drivetrain. don't think you'll find any parts for tuning 1.2 in peru. there's a lot of those parts in russia, but it'll probably cost too much. fiat engine is also an option, there are some models that require very small modifications to fit into lada

I thik thats in peru do not have much parts for lada.

darkmensale wrote:I thik thats in peru do not have much parts for lada.

yes Lada parts are not common here in Peru but i will try with the fiat parts.

You can put engine from fiat but that is not lada anymore

He wants power, I think that really doesn't matters if that isn't Lada anymore.

Sale, tebi je avatar Wankel rotacioni motor iz Mazde, a pricas o Ladi
Mis'im stvarno

Sale, tebi je avatar Wankel rotacioni motor iz Mazde, a pricas o Ladi

Pa sta hoces tim da kazes
Nekom je stalo do toga da lada nije vise lada ako ubacis drugi motor.

Sta je Wankel rotacioni motor :$

bikeraqp wrote:Gentle mans here is my problem. I have a 2101 1200cc and is a good car. it doesnt take too much gas what is good cause now is expensive. I use it just to go to the university , but know im trying to power up the engine a little bit,
darkmen told me to do a couple of things like change the valves and replace (the valves) for a bigger ones to be specific Opel 1.8. Opel parts are quite rare here in Peru. We have tons of japanesse cars. Europeans not too much.
Could you help me with other options .
Another friend told me to use a new camshaft (from Lada Niva) and adjustable camgear. How possible is that .
I need details to repair the engine cause i need to repair it anyway but i like to obtain more power and unfourtunately i was unable to find information about what to do and how to do it .
Well that´s it i hope somebodu can help me

There are many options how to make a Lada engine go beter than stock, but for that you must have experience and equipment to work whit.
The best option to make a 1.2cc stock run better and have a lil better start is to jet your carburator, and put the electronic ignition.
If you can find a 1.7cc or 1.5,1.6cc from lada, you can take the djape's advice (if it's legal to do the transpalantation of motor in Peru).
And yes, there is option is to put turbo on 1.2cc, as i know from my lada friends from estonia it runs better than 1.5cc stock but this tipe of work requires a lot of knowledge. The crankshaft of 1.2cc is very thankfull whit turbo.

Juan best choice for your lada is 1,6 lada engine with biger valves , bigger cylinders and 2 carburettors.

darkmensal>>

SERZAS wrote:

bikeraqp wrote:Gentle mans here is my problem. I have a 2101 1200cc and is a good car. it doesnt take too much gas what is good cause now is expensive. I use it just to go to the university , but know im trying to power up the engine a little bit,
darkmen told me to do a couple of things like change the valves and replace (the valves) for a bigger ones to be specific Opel 1.8. Opel parts are quite rare here in Peru. We have tons of japanesse cars. Europeans not too much.
Could you help me with other options .
Another friend told me to use a new camshaft (from Lada Niva) and adjustable camgear. How possible is that .
I need details to repair the engine cause i need to repair it anyway but i like to obtain more power and unfourtunately i was unable to find information about what to do and how to do it .
Well that´s it i hope somebodu can help me

There are many options how to make a Lada engine go beter than stock, but for that you must have experience and equipment to work whit.
The best option to make a 1.2cc stock run better and have a lil better start is to jet your carburator, and put the electronic ignition.
If you can find a 1.7cc or 1.5,1.6cc from lada, you can take the djape's advice (if it's legal to do the transpalantation of motor in Peru).
And yes, there is option is to put turbo on 1.2cc, as i know from my lada friends from estonia it runs better than 1.5cc stock but this tipe of work requires a lot of knowledge. The crankshaft of 1.2cc is very thankfull whit turbo.

Thanks darkmensale and serzas and sorry about the delay. i was on my final exams.
About replace the engine. yep its ilegal unless you do all the papers and other stuff, but the bigger problem will be to find another engine .
Serzas you say something about jet the carburator. What it means?.and when you say electronic ignition you talk about an electronic distributor or a electronic module to power up the spark .if you are talking about an electronic distributor could you tell me what brand ?.
Yep i dont have too much knowledge about engines but i gonna learn and yes i would love to install a turbo to kick some ... you know

Could you tell me waht i need to do to install a turbo on my 2101
starting from the basic stuff
Thanks brothers

Ohh i just forgot to ask something the other day cleaning my distributor and i found something that the vacuum hose (Thanks again darkmensale) that goes from the distributor to the carburator is not working or is not conected in the right place, i mean i dont know in what part of the carburator conect it. The distributor is working fine but the carburator is not sucking. or i just dont know where to conect the hose into


is correct?, it must be conected here?

And Serzas, whats is the objetive to do this

if you are talking about an electronic distributor could you tell me what brand ?

From lada niva 1,7.

darkmensale wrote:

if you are talking about an electronic distributor could you tell me what brand ?

From lada niva 1,7.

And Lada Samara have one too?